|
Circumstances would seem to indicate that
José López
Beltrán may have worked with Torres in the last few years of his life. We
know that Torres returned to building guitars in 1875, beginning his "secunda
epoca," which lasted until his death in November of 1892.
From 1875 to 1882, he built on average six guitars a year.
During this period, the China shop provided part of his income and consumed some
of his time. In 1883, his wife, Josefa Martín, fell
ill and died of cancer, leaving the sixty-six year old Torres, a widower with
two young daughters--Matilde (b. 1872-73)
and Ana (b.1876)--to support. The China shop ceased to
exist, and Torres turned his energies to building full time. His output from
1883 to his death in 1892 averaged 12 guitars a year. Yet, it is also recorded
that by 1887, Torres' hands shook so badly that he had difficulty signing his
name, and needed help to do assembly work. During this period one of the persons
who helped him was Juan Martinez Sirvent, a young parish priest who became his
trusted friend, helped Torres to do assembly work, "particularly with gluing the back and ribs and the soundboards of his
instruments; tasks he found difficult to carry out by himself because of his
shaking hands" (Romanillos and Winspear 1995:42).
|
|
|
Reading between the lines, here's where I suspect
Jose Lopez
Beltran entered the picture. I
suspect that Martinez Sirvent's duties as a parish priest would have
meant that he was often unable to help Torres do his work. Torres
probably needed more help that this arrangement provided, and he took on
José
López Beltrán
as an assistant. By this time, he probably was less worried about
training a competitor than about having steady help. He had orders to
fill. He also knew that that the great secret of his sound was not
something that anyone could steal from him, as he confessed to Martinez
Sirvent, "it is impossible for me to leave the secret behind for
posterity; this will go to the tomb with me for it is the result of the
feel of the tips of the thumb and forefinger communicating to my
intellect whether the soundboard is properly worked out to correspond to
with the guitar maker's concept and the sound required of the
instrument" (Romanillos and Winspear 1995:17). In fact, as Romanillos
documents, the methods of construction Torres employed were not only in
wide use in Almería, but he shared knowledge of how to do certain
operations with other makers, e.g. Torres taught Miguel Moya Rendono
(1847-1915) how to calculate fret spacing using a compass and the "rule
of 18" (Romanillos 1995:144). So why Torres so secretive? While he may
not have wanted to train competitors, certainly by the end of his life,
this was not a worry. The answer I think is that making a show of being
secretive was good for business. Making a show of secrecy suggested that
he had some special knowledge and techniques that other makers did not
possess. If as Torres confesses that his "special knowledge" was a
part of his own physiology, hence something he could not teach, and
would die with him, there was nothing to be secretive about. What he
could teach, and likely did teach José
López Beltrán
was the then common
techniques of construction, techniques that could be learned from any
competent maker.
|
|
 |
Romanillos finds evidence
that others were involved
in the construction of several guitars built late in
Torres' life (SEU 04, SEU 05, SE 139, SE 151, SE153, SE 155). Most of these
date from 1890-1892. Romanillos speculates that that
Miguel Moya Redondo
may have been the luthier involved. The family seems to have asked Miguel
Moya Redondo to finish some instruments that Torres left unfinished. Guitar
SE 155 dated 1892 seems to have been one of these. I find Romanillos'
argument convincing that Miguel Moya finished SE 155 because it exhibits
decorative elements Moya used in his own guitars. I find
Romanillos' argument much less than persuasive for guitars built
during Torres life. I doubt that Miguel Moya Redondo would give up his
own building and leave his shop to come and help Torres.
Torres' economic situation
in his last years, I believe also makes this unlikely. When his second wife died in 1883, he
was left to raise to young daughters by himself. Although he went back to
building full time, about half of these were humble, simple guitars that would
not have put much money in his pocket. He doesn't seem to have been able to
pay his bills. Torres died so deep in debt that all his property had to be
sold to pay his creditors. Given these circumstances, I think that it is
very unlikely Torres would been able to afford to pay Miguel Moya to come
help him. I think it is much more likely that Torres took on
José López
Beltrán
as an apprentice-- striking a bargain that he would teach him in exchange
for his help. If one accepts my reasoning, then it much more likely
José López
Beltrán was the
second hand involved in making the guitars that were finished before Torres
died.
I think
the evidence points to José
López Beltrán
having worked for Torres toward the end of
his life. This interpretation finds support not just that he was asked by
the family to build the fitted case to ship the Leona to Argentina. As to his claim to be
Torres' only disciple, since we do not know what became of Joaquin Alonso,
it could well be the case that at the time he was building this was true,
and Joaquin had died. The fact that
in 1894, when the family
turned to José
López Beltrán
to build the fitted case for "La Leona," José
was already making this claim, I think
argues strongly that the family had no difficulty with his claim.
Moreover, if there were nothing to his claim,
everyone there would soon know.
So, I find improbable that José
would be so stupid as to advertise himself as Torres' disciple in
Almería for at least
the next 12 years, and run the risk of ruining his reputation.
There is one other piece of evidence that bears on
José López
Beltrán's success as a guitar maker.
Romanillos and Winspear (2002) cite two documents from 1901 and 1903
respectively which register José
López Beltrán
as an jornalero (day laborer) and an obero (a worker). While I have little
doubt that José
López Beltrán
received instruction from Torres, and was accepted as his disciple, what
these documents suggest is that he struggled as a guitar maker, probably
doing it part time. This I should point out was not uncommon. Guitar making
was a poor man's profession. Most makers came from working class families,
often working first as carpenters or cabinet makers. No matter how skilled a
maker might be, unless a famous guitarist used one's guitars or a maker was
particularly skilled at self-promotion, the primary market for guitars was a
local one. In
Almería, which had a
population of 47,000 in 1900, José
López Beltrán
would have had to compete with at least 4
other makers: Juan Castillo and the more established Moya family (Miguel
Moya Redondo, Juan Moya Castillo, Andres Moya Martinez). It is hard to imagine that the demand
for guitars in Almería was that great. Even Torres struggled, and died deep in debt.
So it is not surprising to find José
López Beltrán
working as a day laborer and part-time builder.
 |
Top: German Spruce
Ribs and Back: Cypress
Neck: Mahogany
Fingerboard: Ebony
Upper bout
235 mm
Waist
194 mm
Lower bout
310 mm
Body length
450 mm
Rib depth (top)
60 mm
Rib depth (waist)
65 mm
Rib depth (bottom)
68 mm
Sound hole
80 mm
String scale 635
mm
Weight
0.90 kg
Soundboard aggregate 1064 cm2
Text of Label
José
López Beltrán / Unico
Discipulo /
de /
Don Antonio Torres /
Teatro Apolo / Almería 18[94] handwritten
The words El Tesorero appear on a piece of
parchment used as lining-- but appear to be artifacts of the paper used.
|
What can we learn by examining the 1894
José López
Beltrán. The
proportions of this guitar are generally consistent with the small bodied Torres
guitars. It is closest to the dimensions of FEX
21 (1865), FE 27 (1867), FE 29 (1868), SE 02, (1875) listed in Romanillos and
Winspear (1995).
The guitar has a
three piece back similar to many in Torres' obra. The top is made of two
unmatched pieces of spruce, a trait common in his guitars. The spacing of
kerfling for the top is wide, but consistent with Torres as well. The cross
braces are high, rounded, and go straight into the kerfling, again typical of
Torres. Parchment is used to reinforce the seams of the three piece back, again
something Torres did occasionally.
The bridge seems a bit atavistic, and harkens back to ones Torres made in
his first period. The headstock is an obvious tribute to Torres. At odds
with Torres is the treatment of rosette and the fan bracing. The rosette is
José López
Beltrán's own. Unlike
anything Torres made,
this guitar has three fan braces and no kite. However, this is a small
guitar, and does not appear to need extra bracing. The angel of the braces does,
however, focuses at the 12th fret as in Torres' guitars. Generally, the binding
and lines are consist with Torres' treatment of humbler guitars. Like them, the
cypress used in the back and sides has knots and other defects. While the
workmanship exhibited in this instrument is not up to the level of Torres, it is
what one might expect of a person learning his craft.
By far the strongest argument for
José López
Beltrán having received some instruction from Torres is that this guitar sounds
like a Torres.
1894 Jose Lopez
Beltran played by Gonzalo Andrés Molano
 |
Somewhat puzzling is the word Torres written on
the cross brace that supports the end of the fingerboard in a hand is not unlike
that of Torres.
|
 |
If
this could be proved to be Torres' signature, it would suggest either that
Torres had a hand in helping make this guitar, or that more likely José
may have obtained wood and parts left by Torres from his family. It is easy to
imagine this as most guitar makers have
stocks of wood, prepared tops, necks, harmonic bars, and other parts in
progress at any one time. The woods
in this instrument certainly look like the sort of woods that Torres would have
chosen himself for this class of instrument.
Citations:
Romanillos, José L. and Marian
Harris Winspear, (1995). Antonio de Torres, Guitar Maker - His Life and
Work. West Port, CT: The Bold Strummer, Ltd.
Romanillos Vega, José L. and
Marian Harris Winspear, (2002). (The Vihuela and the Spanish
Guitar. A Dictionary of the Makers of Plucked and Bowed Musical Instruments
of Spain (1200-2002). Guijosa, Spain: The Saguino Press. |